To get you going

We have prepared manuals for you to install an ElimuPi.

What you need

Before you start

How to install the ElimuPi?

  1. Download the most recent ElimuPi RPI4 image from the ElimuPi release page.
  2. Insert the SD card in the slot on your pc.
  3. Start SD Card Formatter
  4. Select Quick format
  5. Change Volume label to BOOT
  6. Click on Format
  1. Confirm that you want to continue by clicking Yes
  1. Click on Ok when the formatting is finished

  1. Start SD Card Formatter

  1. Select the .img file you have just downloaded.
  2. Select the right drive letter (E:\ in my case).
  3. Click on Write.
  1. Confirm that you want to continue by clicking Yes
  1. Wait till Win32 Disk Imager says “Write Successful”.
  2. Click OK to close the window.
  3. Click Exit to close Win32 Disk Imager.
  1. Eject the SD card from your pc by using the Safely remove hardware functionality of Windows. You can find the button in the lower right tray of your taskbar.
  2. Eject the SD card and physically remove the SD card from your computer.
  3. Insert the SD card into the Raspberry Pi.

How to prepare the content disk?

Coming soon

Format an USB external hard disk or USB flash drive as NTFS and rename the drive to “Content”.

  1. Create the following folders:
    • www_log
    • kiwix
    • kolibri
    • fdroid
  2. Copy the content of your choice in the different folders. Here’s how to do this properly.

How to add extra content?

Coming soon